Tyre Repair Kit - BMW R 100 RS 1991

Emergency Tubeless Tyre Repair Kit

Everything needed for emergency roadside repair

Contents:

• 1 T-Bar 'reamer' tool
• 1 T-Bar 'hook' tool
• 5 strips of sealant
• 1 Air valve adaptor hose
• 2 canisters of compressed CO2 with cover

Full instructions are provided on the back of the packaging

• Locate the puncture hole. please note that only punctures in the tread can be repaired. If towards the outside of the tread or in the sidewall, a repair will not be possible and the tyre must be replaced immediately.
• Insert the T-bar reamer tool and work in and out of the puncture hole until it moves smoothly. This both cleans the puncture hole and makes it large enough to insert the sealant plug without breaking it. Remove the reamer tool.
• Thread the sticky sealant strip through the eye of the hook tool until it is held by the middle.
• Push the hook tool (and sealant strip) through the hole
• Twisting the hook as per the instructions releases the sealant strip, allowing you to pull it out while leaving the sealant to plug the hole.
• Trim off any excess sealant with a knife.

Driving a deflated tire can damage the structural integrity of the tire and sidewalls - the CO2 canisters included provide some inflation to keep you going until you can fully re-inflate at a petrol station or garage.